View HERF1601_4820570.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HIGH EFFICIENCY GLASS PASSIVATED RECTIFIER
HERF1601 THRU HERF1607
FEATURES
* * * * * * * * *
VOLTAGE RANGE CURRENT
50 to 1000 Volts 16.0 Ampere
High speed switching Glass passivated chip junction Low power loss for high efficiency Low leakage High surge capacity High temperature soldering guaranteed 250/10 second, 0.16"(4.06mm) lead length Also available in reverse polarity, add the "R" Suffix, i.e. HERF1601R Also available in the single chip version, HER1601
ITO-220AC
MECHANICAL DATA
* * * * * *
Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: solderable per MIL-STD-202E method 208C Polarity: as marked Mounting position: Any, 5 in-lbs Torque Max Weight: 0.08 ounce, 2.24 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% HERF HERF SYMBOLS 1601 1602 Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100
* * Maximum Average Forward Rectified Current At Tc=100 Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage per at 16.0A Maximum DC Reverse Current at rated TA = 25 DC Blocking Voltage at T = 125
A
*
HERF 1603 200 140 200
HERF 1604 300 210 300 16.0 225
HERF 1605 400 280 400
HERF 1606 600 420 600
HERF 1607 800 560 800
UNIT Volts Volts Volts Amps Amps
I(AV) IFSM VF IR trr CJ RJC TJ TSTG 70 1.0
1.3 10 500
1.5
1.7
Volts A
Maximum Reverse Recovery Time Test conditions lF=0.5A, lR=1.0A, lRR=0.25A Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (Note 1) Operating Junction Temperature Storage Temperature Range
100 40 3.0 (-55 to +150) (-55 to +150)
nS pF
/W
NOTES: 1. Unit mounted on heatsink
E-mail: sales@cnmic.com
Web Site: www.cnmic.com
HIGH EFFICIENCY GLASS PASSIVATED RECTIFIER
HERF1601 THRU HERF1607
VOLTAGE RANGE CURRENT
50 to 1000 Volts 16.0 Ampere
RATING AND CHRACTERISTIC CURVES HERF1601 THRU HERF1607
FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,
24
FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE
20
300
CURRENT, (A)
8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 200
16
(A)
12
8.0
Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375(9.5mm) Lead Length
100
4.0
0 0 25 50 75 100 125 150 175 0 1
1 Cycle 2 4 6 8 10 20 40 60 100
AMBIENT TEMPERATURE, ( C)
NUMBER OF CYCLES AT 60 Hz
FIG.4-TYPICAL REVERSE CHARACTERISTICS PER LEG FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT,
100
100
TJ =125 C
INSTANTANEOUS REVERSE CURRENT, (A)
10
/4 00
V
10
(A)
/ 10
0/2
30 0
0 60
00
0 /8
0V
V
1.0
50
1.0
TJ=25 C
TJ =25 C Pulse Width=300us 1% Duty Cycle
0.1 0.4 0.8 1.2 1.6
0.1
INSTANTANEOUS FORWARD VOLTAGE,(V)
0.01 0 20 40 60 80 100 120 140
FIG.5-TYPICAL JUNCTION CAPACITANCE PER LEG
100
PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)
JUNCTION CAPACITANCE,(pF)
F1G.6-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
Trr
50 10 NONINDUCTIVE NONINDUCTIVE (-) 10 (+) 25 Vdc (approx.) (-) TJ =25 C f=1MHz Vsig=50mVp-p D.U.T. PULSE GENERATIOR (NOTE 2) (+) OSCILLOSCOPE (NOTE 1)
+0.5A
0 -0.25A
1 NON INDUCTIVE
-1.0A
1cm
1 0.1 1.0 10 100
REVERSE VOLTAGE,(V)
NOTES : 1.Rise Time=7ns mas. Input Impedance= 1 magohm. 22pF 2.Rise time=10ns max. Source Impedance= 50 ohms
SET TIME BASE FOR 50/100ns/cm
E-mail: sales@cnmic.com
Web Site: www.cnmic.com

▲Up To Search▲

Price & Availability of HERF1601

	To Download HERF1601 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .